Platform specific notes

This chapter contains notes on platform-specific configuration options and pecularities.

Windows

常规

通过软件启用 SAS 生成(Ctrl + Alt + Del)

On Windows per default it's impossible for applications to generate the Secure Attention Sequence (Ctrl+Alt+Del) in order to simulate the press of these keys. When enabling this option a policy is written to the Windows registry which changes this behavior. It is recommended to leave this option enabled in order to be able to send Ctrl+Alt+Del when remote controlling a computer. Otherwise it may be impossible to unlock a remotely controlled computer or logging on a user since in most cases the shortcut Ctrl+Alt+Del has to be issued first.

Default: enabled

用户验证

Veyon implements two different mechanisms to authenticate a user (i.e. verify its username and password) on Windows when using logon authentication. The default mechanism has been used successfully for many years. It is based on the Security Support Provider Interface and works in almost every environment. To verify that the mechanism works properly in your environment you can change the authentication method to Logon authentication and click the Test button.

使用其他用户验证机制

In case the default mechanism is not working in your environment you can try to use an alternative fallback mechanism. This mechanism utilizes a high level function in the operating system which performs a network user logon internally to verify the user credentials. This logon process can be slower than the simple authentication performed by the default mechanism. It should therefore only be used as a last resort.

Default: disabled

用户登陆

In general when using the user log in feature make sure to enable the Interactive logon: Do not display last user name group policy. This makes Windows ask for both a username and a password in the logon screen which is required for the log in feature to work properly. See How To Prevent the Name of the Last Logged-On User from Being Displayed in the Log On to Windows Dialog Box and How to make Windows 10 ask for user name and password during log on for details. Also a logon message must not be configured as it blocks the automated logon procedure. Therefore make sure to disable the Interactive logon: Message title for users attempting to log on and Interactive logon: Message text for users attempting to log on policies. See How to configure Windows Server 2003 to display a message when users log on for details.

Some advanced settings control the timing when simulating key presses to remotely logging in users.

输入启动延迟

This value specifies the number of milliseconds to wait between issuing Ctrl+Alt+Del and sending the first character of the username. This value can be increased on slow computers to ensure that the username input field is ready.

Default: 1000 ms

模拟按键间隔

This value specifies the number of milliseconds to wait between the individual simulated key presses. Increase this value if you encounter logon failures caused by missing characters or improperly switched input fields.

Default: 10 ms

屏幕锁

The screen lock feature per default disables all input devices and hides parts of the operating system user interface. This behaviour can be changed for cases where parts of the operating system user interface no longer function properly after a computer is unlocked.

隐藏任务栏

This option defines whether the taskbar and the start button should be disabled and hidden by the screen lock feature.

Default: enabled

隐藏开始菜单

This option defines whether the start menu should be disabled and hidden by the screen lock feature.

Default: enabled

隐藏桌面

This option defines whether the desktop should be disabled and hidden by the screen lock feature.

Default: enabled

Use input device interception driver

This option defines whether the Interception driver should be used. This driver is used by the screen lock feature to block special key sequences such as Ctrl+Alt+Del at the driver level. The Interception driver may cause troubles with RDP sessions and should therefore be disabled and uninstalled when using Veyon in remote desktop environments. In this case, consider not installing the driver at all during the installation of Veyon by either unchecking the Interception driver option or passing the /NoInterception option to the installer in silent mode. If the driver is already installed, uninstallation is only possible after disabling this option and rebooting the computer. The driver can then be uninstalled using the uninstall.bat script in the interception subdirectory in Veyon's installation directory.

Default: enabled

UltraVNC server settings

Veyon uses a lightweight version of UltraVNC as a builtin VNC server on Windows. While the Veyon Server manages most UltraVNC settings on its own a few performance and system integration related settings can be changed manually. In general you should not need to change the default values unless you encounter problems while accessing or controlling remote computers.

开启多层次(半透明)窗口抓取

When using the traditional screen mirroring driver (i.e. Windows 7 is used or Desktop Duplication Engine is disabled) the VNC server can't capture semi-transparent windows. This can result in large parts of the screen not being captured if the Windows Aero theme is used. To circumvent this issue capturing of semi-transparent windows is enabled per default. Besides potentially lower performance this can also make the mouse cursor flicker on client computers.

Default: enabled

启用多显示器支持

This option says whether to capture only the first of all monitors. On client computers it usually is desirable to see all monitors. On master computers this option can be disabled in order to broadcast only the contents of the first screen in demo mode. This way the teacher does not have to share its whole desktop. Broadcasting less screen data also improves performance.

Default: enabled

启用Windows 8及更新操作系统上的桌面拷贝引擎

When this option is enabled UltraVNC uses the new Desktop Duplication Engine on Windows 8 and newer. This engine is a new driver backend for capturing screen data and provides much better performance compared to the traditional screen mirroring driver. Additionally it also captures windows with DirectX-rendered content, e.g. allowing to view and control DirectX-based CAD applications remotely.

Default: enabled

抓取全屏幕(默认每次开启)

If no suitable driver for capturing screen data is found this determines whether to scan the whole screen for changed pixels. Otherwise only the foreground window is scanned which can reduce CPU load. It should only be disabled as a last resort if CPU load is an issue.

Default: enabled

低分辨率(快速模式)

Enabling this option will make the VNC server use a scan raster to detect changed screen areas which need to be sent to the viewer. As changes of individual pixels might only be detected every 4th scan pass, partial updates can be delayed by a few hundred milliseconds in some cases. At the same time this option greatly improves performance and reduces the CPU load caused by the VNC server.

Default: enabled

Linux

用户验证

In order to authenticate a user (i.e. verify its username and password) on Linux the Veyon Server launches the Veyon Authentication helper (veyon-auth-helper). This small program actually performs the user authentication via Linux PAM. In almost every Linux installation several PAM services are configured and usually managed by Linux distribution specific tools. Veyon uses the PAM service login per default, i.e. authentication is performed through the modules configured in /etc/pam.d/login (Veyon 4.0/4.1 used /etc/pam.d/su).

用于用户认证的定制化的PAM服务

If you want to use a dedicated PAM service configuration to authenticate Veyon users you can enter a custom PAM service name here. A simple identifier such as veyon should be used. If for example set to veyon, the Veyon Authentication helper will use the PAM service veyon, i.e. configuration is taken from the file /etc/pam.d/veyon. Please make sure to provide the PAM service configuration file before using this setting. Otherwise authentication will always fail.

To verify that the custom PAM service is set up properly you can change the authentication method to Logon authentication and click the Test button.